Konica Minolta bizhub PRO 1100 bizhub PRO 1100 Daily Maintenance Guide - Page 39

to enter the setting

Get Konica Minolta bizhub PRO 1100 PDF manuals and user guides View all Konica Minolta bizhub PRO 1100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

7 Measure the resultant restart timing. Allowance: 20 mm r 0.5 mm / 0.79" r 0.02" 20 bizhub PRO 1100 8 If any adjustment is required, press [Exit PrintMode] to return to the [Restart Timing Adjustment] screen. 9 Use the touch panel keypad or the keypad on the control panel to enter the setting data. - Use [+/-] to specify the value to be positive or negative. - Press [Set] to change the Current Value. - Adjustment Range: [All Trays Offset]: ([Lower]) -45 to +45 ([Higher]) (1 step = 0.1 mm) - Adjustment Range: [Trays 1] to [Tray 5], [Bypass]: ([Lower]) -30 to +30 ([Higher]) (1 step = 0.1 mm) - For each tray, you can adjust image edge position of the paper feed direction until the sum of [All Trays Offset] and the adjusted value of the individual tray reaches -60 to +60. 10 Repeat steps 4 to 9 until the desired result is obtained. 2 11 Press [Return]. The screen returns to the [Printer Adjustment Menu] screen. 2-13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
2-13
bizhub PRO 1100
2
7
Measure the resultant restart timing.
Allowance: 20 mm
r
0.5 mm / 0.79"
r
0.02"
8
If any adjustment is required, press [Exit PrintMode] to return to the [Restart Timing
Adjustment] screen.
9
Use the touch panel keypad or the
keypad
on the
control panel
to enter the setting
data.
-
Use [+/-] to specify the value to be positive or negative.
-
Press [Set] to change the Current Value.
-
Adjustment Range: [All Trays Offset]: ([Lower]) -45 to +45 ([Higher]) (1 step = 0.1 mm)
-
Adjustment Range: [Trays 1] to [Tray 5], [Bypass]: ([Lower]) -30 to +30 ([Higher]) (1 step = 0.1 mm)
-
For each tray, you can adjust image edge position of the paper feed direction until the sum of [All
Trays Offset] and the adjusted value of the individual tray reaches -60 to +60.
10
Repeat steps 4 to 9 until the desired result is obtained.
11
Press [Return].
The screen returns to the [Printer Adjustment Menu] screen.
20