Konica Minolta bizhub PRO 1100 bizhub PRO 1100 Daily Maintenance Guide - Page 34

Press [Machine Adjustment], [Printer

Get Konica Minolta bizhub PRO 1100 PDF manuals and user guides View all Konica Minolta bizhub PRO 1100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

)FD-Mag. Adjustment (Side 1) Adjust the magnification in paper feed direction in the printer engine. This adjustment value will be the standard for Both Sides Adjust in Paper Setting. Objects of adjustment: Printer FD-Mag. NOTICE The adjustment of [Printer FD-Mag.] is applied to both the front and back sides. 1 Press [Adjustment] on the [MACHINE] screen to display the [Adjustment Menu] screen. 2 Press [Machine Adjustment], [Printer Adjustment], and [FD-Mag. Adjustment] in sequence. 3 Press [Side 1]. 4 Press [Print Mode]. 5 Load A3 w paper or 11 e 17 w paper into any tray, then select that tray. 6 Press Start on the control panel. A sample pattern will be output. - On the front side of the chart, the chart. mark will be printed so that you can tell which tray is used to print 2-8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
2-8
)
FD-Mag. Adjustment (Side 1)
Adjust the magnification in paper feed direction in the printer engine. This adjustment value will be the standard for
Both Sides Adjust in Paper Setting.
Objects of adjustment: Printer FD-Mag.
NOTICE
The adjustment of [Printer FD-Mag.] is applied to both the front and back sides.
1
Press [Adjustment] on the [MACHINE] screen to display the [Adjustment Menu]
screen.
2
Press [Machine Adjustment], [Printer
Adjustment], and [FD-Mag. Adjustment]
in sequence.
3
Press [Side 1].
4
Press [Print Mode].
5
Load A3
w
paper or 11
e
17
w
paper into any tray, then select that tray.
6
Press
Start
on the
control panel
.
A sample pattern will be output.
-
On the front side of the chart,
mark will be printed so that you can tell which tray is used to print
the chart.