Konica Minolta bizhub PRO 1100 bizhub PRO 1100 Daily Maintenance Guide - Page 68
Press [Front] or [Back] to select the print
View all Konica Minolta bizhub PRO 1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
4 Press [Front] or [Back] to select the print side to be adjusted. 5 Enter the zoom ratio or the image shift value using the keypad, [,], or [+] on the screen or the Keypad on the control panel. - To specify the zoom ratio, press [Vertical] or [Horizontal], then enter a value. [Vertical] is used to adjust the zoom ratio in the crosswise direction. [Horizontal] is used to adjust the zoom ratio in the paper feed direction. To enlarge the print side, enter the value with a positive mark (+). To reduce it, enter the value with a negative mark (-). The adjustment value changes 0.01% on a 1step basis. Adjustment Range: [Vertical] -1.00 to +1.00, [Horizontal] -0.50 to +0.50 - To move the print side upward, downward, leftward, or rightward (image shift), press [Up/Down] or [Right/Left], then enter the value. To move the print side upward or rightward, enter the value with a positive mark (+). To move the print side downward or leftward, enter the value with a negative mark (-). The adjustment value changes 0.1 mm on a 1-step basis. Adjustment range: [Up/Down] / [Right/Left] 10.0 to +10.0 - To switch the positive mark (+) and negative mark (-), press [+/-]. - To reset a value, press [Clear]. - To adjust the zoom ratio and image shift, check the status in the center of a page. 2-42