Konica Minolta bizhub PRO 1100 bizhub PRO 1100 Daily Maintenance Guide - Page 48

Press [Paper Setting] on the [MACHINE], screen.

Get Konica Minolta bizhub PRO 1100 PDF manuals and user guides View all Konica Minolta bizhub PRO 1100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

Making the Both Sides Adjustment for each tray Adjust a misalignment between the front and back sides, which is caused during the duplex printing, for each tray. The following methods are available to carry out the Both Sides Adjustment. - Scan Measurement Adjustment (Page 2-22) - Gap Adjustment (Page 2-31) - Chart Adjustment (Page 2-35) - Zoom and Image Shift Adjustment (Page 2-41) It is convenient to adjust the zoom ratio and printing position of the back side using scan measurement adjustment or gap adjustment after the zoom ratio and printing position of the front side have been adjusted using the chart adjustment or the zoom and image shift adjustment. You do not need to perform both scan measurement adjustment and gap adjustment. )Scan Measurement Adjustment Adjust the magnification ratio and printing position of the back side with reference to the printing position of the front side. The magnification ratio and printing position of the back side are automatically adjusted by using the scanner function of this machine to measure the gap amount in printing position of the back side to the front side. You do not need to measure the gap amount with a scale. The adjustment is available for paper of all sizes which can be used with this machine. Print out 1 to 20 sheets of the adjustment chart having both front and back sides printed, and scan them 4 times per sheet. The average value of gap amounts in printing position of the back side to the front side, which can be obtained by scanning up to 20 sheets of the adjustment chart, will be calculated in order to adjust the magnification ratio and printing position of the back side. NOTICE The [Scan Meas.] adjustment provides the coordination based on the average value of gap amounts, taking into account the gap in printing position between the first and last sheets which can be produced when multiple sheets are output. Performing the [Scan Meas.] adjustment may require readjustment of the "Zoom and Image Shift Adjustment" registered in a paper profile. The [Scan Meas.] adjustment is a simple method to adjust only the magnification ratio and image position of the back side. To adjust both front and back sides, perform the "Chart Adjustment" (Page 2-35) or "Zoom and Image Shift Adjustment" (Page 2-41). 1 Press [Paper Setting] on the [MACHINE] screen. 2-22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
2-22
Making the Both Sides Adjustment for each tray
Adjust a misalignment between the front and back sides, which is caused during the duplex printing, for each tray.
The following methods are available to carry out the Both Sides Adjustment.
-
Scan Measurement Adjustment (
Page 2-22
)
-
Gap Adjustment (
Page 2-31
)
-
Chart Adjustment (
Page 2-35
)
-
Zoom and Image Shift Adjustment (
Page 2-41
)
It is convenient to adjust the zoom ratio and printing position of the back side using scan measurement adjustment or
gap adjustment after the zoom ratio and printing position of the front side have been adjusted using the chart
adjustment or the zoom and image shift adjustment.
You do not need to perform both scan measurement adjustment and gap adjustment.
)
Scan Measurement Adjustment
Adjust the magnification ratio and printing position of the back side with reference to the printing position of the front
side. The magnification ratio and printing position of the back side are automatically adjusted by using the scanner
function of this machine to measure the gap amount in printing position of the back side to the front side. You do not
need to measure the gap amount with a scale. The adjustment is available for paper of all sizes which can be used
with this machine.
Print out 1 to 20 sheets of the adjustment chart having both front and back sides printed, and scan them 4 times per
sheet. The average value of gap amounts in printing position of the back side to the front side, which can be obtained
by scanning up to 20 sheets of the adjustment chart, will be calculated in order to adjust the magnification ratio and
printing position of the back side.
NOTICE
The [Scan Meas.] adjustment provides the coordination based on the average value of gap amounts, taking into
account the gap in printing position between the first and last sheets which can be produced when multiple sheets are
output.
Performing the [Scan Meas.] adjustment may require readjustment of the "Zoom and Image Shift Adjustment"
registered in a paper profile.
The [Scan Meas.] adjustment is a simple method to adjust only the magnification ratio and image position of the back
side. To adjust both front and back sides, perform the "Chart Adjustment" (
Page 2-35
) or "Zoom and Image Shift
Adjustment" (
Page 2-41
).
1
Press [Paper Setting] on the [MACHINE]
screen.