Konica Minolta bizhub PRO 1100 bizhub PRO 1100 Daily Maintenance Guide - Page 38
Adjustment], and [Restart Timing
View all Konica Minolta bizhub PRO 1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
)Restart Timing Adjustment (Side 1) Adjust the image position of lead edge in paper feed direction in the printer engine. Objects of adjustment: All Trays Offset, Restart Timing (Tray 1 to Tray 5), Restart Timing (Bypass) NOTICE Make this adjustment after completing [FD-Mag. Adjustment]. The adjustment of [All Trays Offset] is applied to both the front and back sides. 1 Press [Adjustment] on the [MACHINE] screen to display the [Adjustment Menu] screen. 2 Press [Machine Adjustment], [Printer Adjustment], and [Restart Timing Adjustment] in sequence. 3 Press [Side 1]. 4 Press [Print Mode]. 5 Load A3 w paper or 11 e 17 w paper into any tray, then select that tray. 6 Press Start on the control panel. A sample pattern will be output. - On the front side of the chart, the chart. mark will be printed so that you can tell which tray is used to print 2-12