LG 37LP1D Owners Manual - Page 22

Installation Screen Setup - This function works in the following mode: Component 1, Component 2, RGB-PC, RGB-DTV, or HDMI/DVI-DTV. Note: Some signal from some graphics boards may not function properly. If the results are unsatisfactory, adjust your monitor's position, size and phase manually. * Adjustment for screen Position, Clock, and Phase POSITION G CLOCK PHASE RESET MENU Close D F G E D Move E Mini Glossary Position This function is to adjust the picture left/right and up/down as you prefer. Clock This function is to minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. Phase This function allows you to remove any horizontal noise and clear or sharpen the image of characters. 1 Press the OK button and then use D / E button to select POSITION, CLOCK, or PHASE. 2 Press G button and then use D / E / F / G buttons to make appropriate adjustments. • The PHASE adjustment range is 0 ~ 31. The PHASE only works in Component 1-2, RGB-PC and RGB-DTV mode. • The CLOCK adjustment range is -50 ~ +50. The CLOCK only works in RGB-PC mode. 3 Press the OK button. * Initializing (Reset to original factory values) POSITION CLOCK PHASE RESET G Initialize Settings MENU Close D Move E - This function allows you to return to the good picture reproduction programmed at the factory and cannot be changed. 1 Press the OK button and then use D / E button to select the RESET option. 2 Press G button and then use F / G button to select Yes. 3 Press the OK button. 22