LG 37LP1D Owners Manual - Page 25

Setup Menu Options Operation Auto Programme Tuning SETUP G PICTURE AUDIO TIME SPECIAL Auto programme Manual programme Programme edit Signal strength Booster Front display Logo light Set ID LOCK SETUP Auto programme G Storage from 0 Manual programme To start PICTURE Programme edit Signal strength AUDIO Booster Front display TIME Logo light Set ID SPECIAL LOCK MENU Prev. Processing Auto programme... 26 % 5 channels found Press (OK) to start digital programme scan. MENU Prev. - Up to 100 TV stations can be stored in this set by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the PR D / E or NUMBER buttons to scan the stations you programmed. Stations can be tuned using automatic or manual modes. - In Digital mode, up to 400 TV stations can be stored. - A password is required to gain access to Auto programme or Manual programme menu if the Lock system is turned on. - If you forgot your password, press '7', '7', '7', '7' on the remote control. - In Australia, if no station name can be assigned to a station, the channel number is assigned and stored as ----- followed by a number see 'Assigning a station name' section to assign the station name. 1 Press the MENU button and then D / E button to select the SETUP menu. 2 Press the G button and then D / E button to select Auto programme. 3 Press the G button to select Storage from. Select the beginning programme number with the D / E button or NUMBER buttons. 4 Press the G button to select To start. 5 Press the OK button to begin auto programming. All receivable stations are stored. To stop auto programming, press the OK button. When auto programming is completed, the Programme edit menu appears on the screen. See the 'Programme Edit' section to edit the stored programme. 6 Press the EXIT button to return to normal TV viewing. 25