Lenovo ThinkCentre A58e Hardware Maintenance Manual - Page 52

Flash the system. See Updating flashing BIOS, BIOS Configuration/Setup error

Get Lenovo ThinkCentre A58e PDF manuals and user guides View all Lenovo ThinkCentre A58e manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

Diagnostic error code 000-026-XXX FLASH data error 000-027-XXX BIOS Configuration/Setup error 000-034-XXX BIOS Buffer Allocation failure 000-035-XXX BIOS Reset Condition detected 000-036-XXX BIOS Register error 000-038-XXX BIOS Extension failure 000-039-XXX BIOS DMI data error 000-195-XXX BIOS Test aborted by user 000-196-XXX BIOS test halt, error threshold exceeded 000-197-XXX BIOS test warning 000-198-XXX BIOS test aborted 000-199-XXX BIOS test failed, cause unknown FRU/Action 1. Flash the system. See "Updating (flashing) BIOS from a disc" on page 99 2. System board 1. Run Setup 2. Flash the system. See "Updating (flashing) BIOS from a disc" on page 99 3. System board 1. Reboot the system 2. Flash the system. See "Updating (flashing) BIOS from a disc" on page 99 3. Run memory test 4. System board 1. Flash the system. See "Updating (flashing) BIOS from a disc" on page 99 2. System board 1. Flash the system. See "Updating (flashing) BIOS from a disc" on page 99 2. System board 1. Flash the system. See "Updating (flashing) BIOS from a disc" on page 99 2. Adapter card 3. System board 1. Flash the system. See "Updating (flashing) BIOS from a disc" on page 99 2. System board Information only Re-start the test, if necessary 1. Press F3 to review the log file 2. Re-start the test to reset the log file 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Using the Setup Utility" on page 41 2. Re-run test 3. Replace the component that is called out in warning statement 4. Replace the component under test 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Using the Setup Utility" on page 41 2. Flash the system and retest. See "Updating (flashing) BIOS from a disc" on page 99 3. Go to "Undetermined problems" on page 64 1. Go to "Undetermined problems" on page 64 2. Flash the system and re-test 3. Replace component under function test 46 Hardware Maintenance Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
Diagnostic error code
FRU/Action
000-026-XXX
FLASH data error
1. Flash the system. See “Updating (flashing) BIOS
from a disc” on page 99
2. System board
000-027-XXX
BIOS Configuration/Setup error
1. Run Setup
2. Flash the system. See “Updating (flashing) BIOS
from a disc” on page 99
3. System board
000-034-XXX
BIOS Buffer Allocation failure
1. Reboot the system
2. Flash the system. See “Updating (flashing) BIOS
from a disc” on page 99
3. Run memory test
4. System board
000-035-XXX
BIOS Reset Condition detected
1. Flash the system. See “Updating (flashing) BIOS
from a disc” on page 99
2. System board
000-036-XXX
BIOS Register error
1. Flash the system. See “Updating (flashing) BIOS
from a disc” on page 99
2. System board
000-038-XXX
BIOS Extension failure
1. Flash the system. See “Updating (flashing) BIOS
from a disc” on page 99
2. Adapter card
3. System board
000-039-XXX
BIOS DMI data error
1. Flash the system. See “Updating (flashing) BIOS
from a disc” on page 99
2. System board
000-195-XXX
BIOS Test aborted by user
Information only Re-start the test, if necessary
000-196-XXX
BIOS test halt, error threshold exceeded
1. Press F3 to review the log file
2. Re-start the test to reset the log file
000-197-XXX
BIOS test warning
1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using the
Setup Utility” on page 41
2. Re-run test
3. Replace the component that is called out in warning
statement
4. Replace the component under test
000-198-XXX
BIOS test aborted
1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using the
Setup Utility” on page 41
2. Flash the system and retest. See “Updating (flashing)
BIOS from a disc” on page 99
3. Go to “Undetermined problems” on page 64
000-199-XXX
BIOS test failed, cause unknown
1. Go to “Undetermined problems” on page 64
2. Flash the system and re-test
3. Replace component under function test
46
Hardware Maintenance Manual