Lenovo ThinkCentre A58e Hardware Maintenance Manual - Page 81

from the old optical drive and install it on the side of the new, optical drive.

Page 81 highlights

1. Remove the computer cover. See "Removing the computer cover" on page 68. 2. Remove the front bezel. See "Removing and reinstalling the front bezel" on page 69. 3. Disconnect the signal cable and the power cable from the rear of the optical drive. 4. Press the blue release button 1 and slide the optical drive out the front of the computer. Figure 15. Removing the optical drive 5. Remove the optical drive retainer 1 from the old optical drive and install it on the side of the new optical drive. Figure 16. Installing the retainer on the optical drive 6. Slide the new optical drive into the drive bay until it snaps into position. Chapter 8. Replacing FRUs 75

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110

1. Remove the computer cover. See “Removing the computer cover” on page 68.
2. Remove the front bezel. See “Removing and reinstalling the front bezel” on page 69.
3. Disconnect the signal cable and the power cable from the rear of the optical drive.
4. Press the blue release button
1
and slide the optical drive out the front of the computer.
Figure 15. Removing the optical drive
5. Remove the optical drive retainer
1
from the old optical drive and install it on the side of the new
optical drive.
Figure 16. Installing the retainer on the optical drive
6. Slide the new optical drive into the drive bay until it snaps into position.
Chapter 8
.
Replacing FRUs
75