Lenovo ThinkCentre A58e Hardware Maintenance Manual - Page 58

Diagnostic error code, FRU/Action, 197-XXX, 000-XXX, PCI card test aborted by user

Get Lenovo ThinkCentre A58e PDF manuals and user guides View all Lenovo ThinkCentre A58e manuals
Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

Diagnostic error code FRU/Action 015-197-XXX USB port test warning 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Using the Setup Utility" on page 41 2. Re-run test 3. Replace the component that is called out in warning statement 4. Replace the component under test 015-198-XXX USB port test aborted 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6 "Using the Setup Utility" on page 41 2. Flash the system and re-test. See "Updating (flashing) BIOS from a disc" on page 99 3. Go to "Undetermined problems" on page 64 015-199-XXX USB port test failed, cause unknown 1. Go to "Undetermined problems" on page 64 2. Flash the system and re-test. See "Updating (flashing) BIOS from a disc" on page 99 3. Replace component under function test 018-000-XXX PCI card test passed No action 018-0XX-XXX PCI card failure 1. Riser card, if installed 2. System board 018-195-XXX PCI card test aborted by user 1. PCI card 2. Information only Re-start the test, if necessary 018-196-XXX PCI card test halt, error threshold exceeded 1. Press F3 to review the log file 2. Re-start the test to reset the log file 018-197-XXX PCI card test warning 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Using the Setup Utility" on page 41 2. Re-run test 3. Replace the component that is called out in warning statement 4. Replace the component under test 018-198-XXX PCI card test aborted 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6 "Using the Setup Utility" on page 41 2. Flash the system and re-test. See "Updating (flashing) BIOS from a disc" on page 99 3. Go to "Undetermined problems" on page 64 018-199-XXX PCI card test failed, cause unknown 1. Go to "Undetermined problems" on page 64 2. Flash the system and re-test. See "Updating (flashing) BIOS from a disc" on page 99 3. Replace component under function test 018-250-XXX PCI card services error 1. PCI card 2. Riser card, if installed 3. System board 020-000-XXX PCI interface test passed No action 52 Hardware Maintenance Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
Diagnostic error code
FRU/Action
015-197-XXX
USB port test warning
1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using the
Setup Utility” on page 41
2. Re-run test
3. Replace the component that is called out in warning
statement
4. Replace the component under test
015-198-XXX
USB port test aborted
1. If a component is called out, make sure it is
connected and/or enabled. See Chapter 6 “Using the
Setup Utility” on page 41
2. Flash the system and re-test. See “Updating
(flashing) BIOS from a disc” on page 99
3. Go to “Undetermined problems” on page 64
015-199-XXX
USB port test failed, cause unknown
1. Go to “Undetermined problems” on page 64
2. Flash the system and re-test. See “Updating
(flashing) BIOS from a disc” on page 99
3. Replace component under function test
018-000-XXX
PCI card test passed
No action
018-0XX-XXX
PCI card failure
1. Riser card, if installed
2. System board
018-195-XXX
PCI card test aborted by user
1. PCI card
2. Information only Re-start the test, if necessary
018-196-XXX
PCI card test halt, error threshold exceeded
1. Press F3 to review the log file
2. Re-start the test to reset the log file
018-197-XXX
PCI card test warning
1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using the
Setup Utility” on page 41
2. Re-run test
3. Replace the component that is called out in warning
statement
4. Replace the component under test
018-198-XXX
PCI card test aborted
1. If a component is called out, make sure it is
connected and/or enabled. See Chapter 6 “Using the
Setup Utility” on page 41
2. Flash the system and re-test. See “Updating
(flashing) BIOS from a disc” on page 99
3. Go to “Undetermined problems” on page 64
018-199-XXX
PCI card test failed, cause unknown
1. Go to “Undetermined problems” on page 64
2. Flash the system and re-test. See “Updating
(flashing) BIOS from a disc” on page 99
3. Replace component under function test
018-250-XXX
PCI card services error
1. PCI card
2. Riser card, if installed
3. System board
020-000-XXX
PCI interface test passed
No action
52
Hardware Maintenance Manual