Lenovo ThinkCentre A58e Hardware Maintenance Manual - Page 53
FRU/Action, BIOS APM failure
View all Lenovo ThinkCentre A58e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Diagnostic error code 000-250-XXX BIOS APM failure 000-270-XXX BIOS ACPI failure 001-000-XXX System test passed 001-00X-XXX System error 001-01X-XXX System error 001-024-XXX System addressing test failure 001-025-XXX System checksum value error 001-026-XXX System FLASH data error 001-027-XXX System configuration/setup error 001-032-XXX System device controller failure 001-034-XXX System device buffer allocation failure 001-035-XXX System device reset condition detected 001-036-XXX System register error 001-038-XXX System extension failure 001-039-XXX System DMI data structure error 001-040-XXX System IRQ failure 001-041-XXX System DMA failure 001-195-XXX System test aborted by user 001-196-XXX System test halt, error threshold exceeded FRU/Action 1. Flash the system. See "Updating (flashing) BIOS from a disc" on page 99 2. System board 1. Flash the system. See "Updating (flashing) BIOS from a disc" on page 99 2. System board No action System board System board System board 1. Flash the system. See "Updating (flashing) BIOS from a disc" on page 99 2. System board 1. Flash the system. See "Updating (flashing) BIOS from a disc" on page 99 2. System board 1. Run Setup 2. Flash the system. See "Updating (flashing) BIOS from a disc" on page 99 3. System board System board 1. Reboot the system 2. Flash the system. See "Updating (flashing) BIOS from a disc" on page 99 3. Run memory test 4. System board System board System board 1. Adapter card 2. System board 1. Flash the system. See "Updating (flashing) BIOS from a disc" on page 99 2. System board 1. Power-off/on system and re-test 2. System board 1. Power-off/on system and re-test 2. System board Information only Re-start the test, if necessary 1. Press F3 to review the log file 2. Re-start the test to reset the log file Chapter 7. Symptom-to-FRU index 47