Lexmark 34S0709 User Guide - Page 69
Printing information s, Printing a font sample list, Printing a directory list
UPC - 734646084505
View all Lexmark 34S0709 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Printing 69 Printing information pages For more information on printing information pages, see "Printing a menu settings page" on page 28 and "Printing a network setup page" on page 29. Printing a font sample list To print samples of the fonts currently available for your printer: 1 Make sure the printer is on and Ready appears. 2 From the printer control panel, press . 3 Press the up or down arrow button until Reports appears, and then press . 4 Press the up or down arrow button until Print Fonts appears, and then press . 5 Press the up or down arrow button until appears next to PCL Fonts, PostScript Fonts, or PPDS Fonts, and then press . Note: PPDS Fonts appear only if the PPDS datastream has been activated. After the font sample list prints, Ready appears. Printing a directory list A directory list shows the resources stored in flash memory. 1 Make sure the printer is on and Ready appears. 2 From the printer control panel, press . 3 Press the up or down arrow button until Reports appears, and then press . 4 Press the up or down arrow button until Print Directory appears, and then press . After the directory list prints, the printer returns to the Ready state. Printing the print quality test pages Print the print quality test pages to isolate print quality problems. 1 Turn the printer off. 2 Hold down and the right arrow button while turning the printer on. 3 Release the buttons when the clock appears, and wait for CONFIG MENU to appear. 4 Press the up or down arrow button until Prt Quality Pgs appears, and then press . The print quality test pages print. 5 Press the up or down arrow button until Exit Config Menu appears, and then press . Resetting the Printer appears briefly, followed by a clock, and then Ready appears.