Lexmark C524 Menus and Messages Guide - Page 14

Using printer menus Custom Types This menu item is used to define a name for each custom paper type. Assign names using a utility such as MarkVision™ or from the operator panel. Menu item Custom Type Purpose Values Specifies the type of media associated with each Custom Type available in the Paper Type menu. *Paper Card Stock Transparency Glossy Labels Envelope The custom type media must be supported in the designated source in order to assign a user-defined name. Once the name is assigned, the name (truncated to 16 characters) is displayed instead of Custom Type . Universal Setup These menu items are used to specify the height and width of the Universal Paper Size. By specifying the height and width for Universal Paper Size, the printer uses the Universal setting exactly like other paper sizes, including support for duplex and n-up. For more information on n-up, see Multipage Print. Menu item Purpose Values Units of Measure Determines the unit of measure used to enter the Universal Height and Width. Inches Millimeters Portrait Width Sets the portrait width of the universal media. Note: If the value set exceeds the maximum width, the printer uses the maximum value allowed in inches or millimeters. 3 inches to 14.17 inches in 0.01 inch increments 76 mm to 360 mm in 1 mm increments Portrait Height Sets the portrait height of the universal media. Note: If the value set exceeds the maximum height, the printer uses the maximum value allowed in inches or millimeters. 3 inches to 14.17 inches in 0.01 inch increments 76 mm to 360 in 1 mm increments Feed Direction Specifies the feed direction of the Universal Paper Size. *Short Edge Long Edge Inches is the US default and Millimeters is the international default. Shows either inches or millimeters from Units of Measure setting; 8.5 inches is the US default, and 216 mm is the international default. Shows either inches or millimeters from Units of Measure setting; 14 inches is the US default, and 356 millimeters is the international default. Long Edge is only shown if the longest edge is shorter than the maximum physical width that the printer tray can accommodate. Reports Menu Settings Page This menu item prints a menu settings page. Menu item Menu Settings Page Purpose Prints information relating to the default printer settings and verifies that printer options are installed correctly. Values After selecting this item, the page prints and the printer returns to Ready. Menu Groups 14