Lexmark C524 Menus and Messages Guide - Page 47

Understanding printer messages Message Waiting 1565 Emul Error Load Emul Option 31 Missing or defective cartridge 32 Replace unsupported cartridge 34 Incorrect media 34 Short Paper 35 Insufficient memory to support Resource Save feature 37 Insufficient memory to collate job 37 Insufficient memory for Flash Memory Defragment operation 37 Insufficient memory, some held jobs were deleted 37 Insufficient memory, some held jobs were lost 38 Memory Full Action The printer has received a page of data to print, but is waiting for an End of Job command, a Form Feed command, or additional data. • Press to print the contents of the buffer. • Cancel the current job. The printer automatically clears the message in 30 seconds, and then disables the download emulator on the firmware card. Download the correct download emulator version from the Lexmark Web site. Remove the specified toner cartridge, and then place it in the correct position. Remove the toner cartridge, and install a supported one. • Load the appropriate media in the selected source. • Press until Continue appears, and then press to clear the message and print the job using a different paper source. • Press until Continue appears, and then press the message and continue printing. to clear The printer does not automatically reprint the page that prompted the message. • Check tray length and width guides to ensure media is properly fitted. • Make sure the print job is requesting the correct size of media. • Adjust the Paper Size setting for the size media being used. If MP Feeder Size is set to Universal, make sure the media is large enough for the formatted data. • Cancel the current job. • Press until Continue appears, and then press to disable Resource Save and continue printing. • To enable Resource Save after receiving this message: - Make sure the link buffers are set to Auto, then exit the menus to activate the link buffer changes. - When Ready is displayed, enable Resource Save. • Install additional memory. • Press until Continue appears, and then press to print the portion of the job already stored and begin collating the rest of the job. • Cancel the current job. • Press until Continue appears, and then press the defragment operation and continue printing. • Delete fonts, macros, and other data in printer memory. • Install additional printer memory. to stop The printer deleted some held jobs in order to process current jobs. Press until message. Continue appears, and then press to clear the The printer was unable to restore some or all of the confidential or held jobs on the hard disk. Press until message. Continue appears, and then press to clear the • Press until Continue appears, and then press the message and continue printing. The job may not print correctly. • Cancel the current job. • Install additional printer memory. to clear Understanding printer messages 47