Lexmark C524 Menus and Messages Guide - Page 46

Understanding printer messages Message Remove all color supplies Remove paper from standard output bin Resetting Fuser Count Resetting the Printer Restore Held Jobs? Restoring Factory Defaults Restoring Held Job(s) x/y Serial Setup Required Some held jobs were lost Standard Bin Full Submitting selection Tray Empty Tray Low Tray Missing USB USB View supplies Action The printer is set to Black Only mode in the CONFIG MENU in the Print Mode menu item. • Remove all color toner cartridges and color photoconductor units. • Press until Continue appears, and then press to clear the message and print in Black Only mode. • Cancel the current job. • See the User's Guide for more information. Remove the media from the standard bin. Wait for the message to clear. Wait for the message to clear. • Press until Continue appears, and then press to restore all Print and Hold jobs on the hard disk. • Press until Do not restore appears, and then press to delete Print and Hold jobs. Wait for the message to clear. Note: When factory default settings are restored: • All downloaded resources (fonts, macros, symbol sets) in the printer memory are deleted. • All menu settings return to the factory default setting except: - The Display Language setting in the "Setup" Menu. - All settings in the "Parallel" Menu, "Serial" Menu, "Network" Menu, "Infrared" Menu, "LocalTalk" Menu, "USB" Menu, and "Fax" Menu. • Wait for the message to clear. • Press until Quit restoring appears, and then press to delete unrestored Print and Hold jobs. Note: x represents the number of the job being restored, and y represents the total number of jobs to be restored. A serial interface is the active communication link. Remove the packing material from the printer. Make sure all supplies, the fuser, the transfer belt, and the trays are installed correctly. • Press until Continue appears, and then press the message and continue printing. to clear The printer frees memory by deleting the oldest held job and continues deleting held jobs until there is enough printer memory to process the job. • Cancel the current job. Remove the stack of media from the bin to clear the message. Wait for the message to clear. Load media in the tray to clear the message. Add media to the tray to clear the message. Insert the tray. The printer is processing data through the specified USB port. Displays the current level of all printer supplies. Understanding printer messages 46