Lexmark C524 Menus and Messages Guide - Page 29

Using printer menus Menu item PCL Emulation Settings Purpose Changes the point size for scalable typographic fonts. Values Point Size: 1.00-1008.00 (*12) Specifies the font pitch for scalable Pitch: monospaced fonts. 0.08-100.00 (*10) Determines how text and graphics are oriented on the page. Orientation: *Portrait Landscape Determines the number of lines that print on each page. Lines per Page: 1-255 *60 (US) *64 (non-US) Sets the width of the logical page for A4 size paper. A4 Width: *198 mm 203 mm Specifies whether the printer automatically performs a carriage return after a line feed control command. Auto CR after LF: On *Off Specifies whether the printer automatically performs a line feed after a carriage return control command. Auto LF after CR: On *Off Point size refers to the height of the characters in the font. One point equals approximately 1/72 of an inch. Point sizes from 1 to 1008 in increments of 0.25 points can be selected. Note: Point Size is only displayed for typographic fonts. Pitch refers to the number of fixedspace characters in a horizontal inch of type. A pitch from 0.08 to 100 characters per inch (cpi) in increments of 0.01 cpi can be selected. For nonscalable monospaced fonts, the pitch is displayed but cannot be changed. Note: Pitch is only displayed for fixed, or monospaced, fonts. Portrait prints text and graphics parallel to the short edge of the paper. Landscape prints text and graphics parallel to the long edge of the paper. The printer sets the amount of space between each line (vertical line spacing) based on the Lines per Page, Paper Size, and Orientation menu items. Select the correct Paper Size and Orientation before changing Lines per Page. Note: The 203 mm setting makes the logical page wide enough to print eighty 10-pitch characters. Off-Printer does not perform a carriage return after a line feed control command. On-Printer performs a carriage return after a line feed control command. Off-Printer does not perform a line feed after a carriage return control command. On-Printer performs a line feed after a carriage return control command. Menu Groups 29