Lexmark C950 Service Manual - Page 306

5058-030 • Page counts for most errors • Additional debug information in some cases Model and Serial number Lexmark x54x (s/n: 98P104V) Printer information Panel display when error occurred Page count Earliest error code Previous Next Go Back The printed event log can be faxed to your next level of support for verification or diagnosis. To print the event log, navigate to EVENT LOG > Print Log. FINISHER TESTS Feed Test (Finisher) This test feeds one sheet of media from the device's default input source to a finisher output bin. The device can perform this test using any paper size that is supported by the finisher. Hole Punch Test This test is used to verify that media can be fed to a finisher output bin and then hole-punched. No information is printed on the feed test pages since the printhead LED isn't engaged during this test. Eight sheets of paper are fed, and then the pages are hole-punched with a 2-hole, a 3-hole or a 4-hole pattern depending on the selected punch test. Although the source searching algorithm may result in paper being fed from another source, media initially is requested from the default input source and then is transported to the finisher output bin. Staple Test This test is used to verify the functioning of the finisher's staple mechanism. HARDWARE TESTS Button Test The Button Test is used to verify the operation of each button on the operator panel. 3-18 Service Manual