Home » Lexmark Manuals » Laser Printers » Lexmark Multifunction Laser » Manual Viewer

Lexmark Multifunction Laser C78x - Setup Guide - Page 21

Step 11: Installing output options

View all Lexmark Multifunction Laser manuals

Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

Step 11: Installing output options Step 11: Installing output options If you purchased an output option (output expander, 5-bin mailbox, or StapleSmart™ finisher), follow these steps: 1 Remove the top cover from the printer. You will not need the cover when the output option is attached. Store the cover; it will be needed if you remove the output option. 2 Remove the option from the box, and follow the installation setup instructions that came with the option. 3 Place the tips of the wire bail into the ends of the plastic bracket so that the bail curves downward. 1 2 The wire bail came with the printer and rests in the standard output bin when installed. 4 Follow the instructions that came with the option to attach the plastic bracket to the output expander, 5-bin mailbox, or StapleSmart™ finisher. Step 11: Installing output options 21

Section	Page
Overview	7
MFP configurations	7
Turning off the printer	7
Selecting a location for your printer and MFP	7
Customizing your MFP option	8
Step 1: Setting up furniture	9
Step 2: Installing optional drawers	10
Step 3: Installing the duplex unit	10
Step 4: Unboxing the printer	10
Step 5: Preparing the printer	11
Removing the print cartridge packaging	11
Loading paper	14
Step 6: Installing an optional operator panel cover	15
Step 7: Attaching a scanner shelf	16
Step 8: Installing the scanner on a scanner shelf	17
Step 9: Unlocking the scanner	19
Step 10: Installing the scanner without a scanner shelf	19
Step 11: Installing output options	21
Step 12: Installing memory, option, or interface cards	22
Accessing the printer system board	22
Installing a memory card	23
Installing an “option-added” firmware card	24
Installing the interfacecard	25
Replacing the access cover plate	27
Step 13: Attaching cables to the printer and the scanner	28
Step 14: Installing drivers for the printer, MFP, and other options	31
Installing drivers	31
Step 15: Setting up fax and IP addresses	32
Fax setup	32
Performing manual fax setup	32
Assigning a printer IP address	33
Verifying the IP settings	33
Performing browser fax setup	34
Step 16: Verifying MFP setup	35
Printing a menu settingspage	35
Printing the Help pages	35
Making a test copy	35
Sending a test fax	35
Testing a scan to PC profile	36
Step 17: Solving setup problems	37

Match case Limit results 1 per page

Step 11: Installing output options

If you purchased an output option (output expander, 5-bin mailbox, or StapleSmart™ finisher), follow these steps:

Remove the top cover from the printer.

You will not need the cover when the output option is attached. Store the cover; it will be needed if you remove the

output option.

Remove the option from the box, and follow the installation setup instructions that came with the option.

Place the tips of the wire bail into the ends of the plastic bracket so that the bail curves downward.

The wire bail came with the printer and rests in the standard output bin when installed.

Follow the instructions that came with the option to attach the plastic bracket to the output expander, 5-bin

mailbox, or StapleSmart™ finisher.