Lexmark Multifunction Laser C78x - Setup Guide - Page 27
Replacing the access cover plate
View all Lexmark Multifunction Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Step 12: Installing memory, option, or interface cards 4 Align the connection points on the card with the connector on the system board, and then push the top of the card firmly into the system board connector. 5 Insert and tighten the screws to secure the card. Replacing the access cover plate After you have installed options on the printer system board, follow these steps to reattach the access cover plate. 1 Align the slots at the top of the access cover with the screws near the top of the printer. 2 Slide the cover up under the top cover lip as far as it will go. 3 Insert and tighten the (four) screws at the top and bottom of the cover. Replacing the access cover plate 27
Replacing the access cover plate
27
Step 12: Installing memory, option, or interface cards
4
Align the connection points on the card with the connector on the system board, and then push the top of the card
firmly into the system board connector.
5
Insert and tighten the screws to secure the card.
Replacing the access cover plate
After you have installed options on the printer system board, follow these steps to reattach the access cover plate.
1
Align the slots at the top of the access cover with the screws near the top of the printer.
2
Slide the cover up under the top cover lip as far as it will go.
3
Insert and tighten the (four) screws at the top and bottom of the cover.