Lexmark Optra E Service Manual - Page 24
Service Error Codes, Press and release the operator panel button to display the service
View all Lexmark Optra E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
4026-0XX Service Error Codes When a service error occurs the printer stops printing and all operator panel LEDs blink in a continuous pattern, indicating a service error, until the printer is powered off. Press and release the operator panel button to display the service error code. Locate the blinking LEDs in the following table and take the indicated action. Blinking Operator Panel LED Software Service Error Code Action Run the Printer Diagnostic Test to diagnose between the ROM SIMM and the controller board. If no other error code displays after the test completes, replace the controller board. Fuser Failure Error Go to the "Cold Fuser Service Check" on page 2-18. Mirror Motor Error Laser Diode Failure The Polygon Mirror Motor is not rotating during printing. Replace the engine board. If this does not correct the problem, replace the printhead assembly. Replace the printhead assembly. If this does not correct the problem, replace the engine board. 2-2