Lexmark Optra E Service Manual - Page 62
White or Black Lines or Bands, causes white/black bands or lines.
View all Lexmark Optra E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
4026-0XX FRU Action 2 Cables/Con- Be sure the printhead cables to the engine nectors board are properly seated. 3 HVPS Con- Be sure the HVPS is correctly installed. Be sure tacts the two high voltage contacts and the ground contact are not damaged. Repair as necessary. 4 HVPS Cover Check the HVPS cover for pitted or damaged contacts. Replace as necessary. 5 Printhead If all the previous checks are correct, replace the Assembly, following FRUs one at a time in the order shown: Engine Board, HVPS Printhead Assembly Engine board HVPS White or Black Lines or Bands Note: Poor image development, incorrect charging of the photoconductor, incorrect laser exposure, poor image transfer, or poor fusing causes white/black bands or lines. FRU Action 1 Toner Car- Remove the toner cartridge and gently shake to tridge evenly distribute the toner. Check the cartridge drive gear and contacts for damage. Replace the toner cartridge as necessary. 2 Photoconduc- Check the photoconductor unit for damage to tor Unit the drive gear or contact. Replace as necessary. 2-40