Lexmark Optra E Service Manual - Page 63
Diagnostic Information 2-41, Offset Print, Transfer Assembly Service Check on,
View all Lexmark Optra E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
4026-0XX FRU Action 3 Transfer Corona Cleaning Clean the corona wire to remove any toner that has accumulated. Open the top cover and locate the cleaning tool. Unsnap the cleaning tool from its holder. The corona wire is located directly in front of the transfer unit. Hook the cleaning tool under the transfer unit with the clear "needle' facing you. As you slide the cleaning tool back and forth a few times to remove any toner buildup, you hear a clicking sound. If you do not hear this sound, the tool is not seated correctly. Return the cleaning tool to its mounting in the top cover and close the cover. 4 Fuser Assem- Check the fuser for toner buildup. Be sure the bly hot roll, backup roll, and thermistor are not dam- aged. Repair as necessary. 5 Transfer Go to the "Transfer Assembly Service Check" on Assembly page 2-44. 6 Printhead If all the previous checks are correct, replace the printhead assembly. Offset Print FRU 1 Fuser Action Replace the lower fuser assembly. Diagnostic Information 2-41