Lexmark Optra E Service Manual - Page 53
Diagnostic Information 2-31, from Tray Two but instead feeds from Tray One. Tray Two reset
View all Lexmark Optra E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
4026-0XX Paper Tray Two selected in the application. Paper does not feed from Tray Two but instead feeds from Tray One. Tray Two reset to Tray One in printer utility. FRU Action 1 Engine Board Be sure the voltage at CN9-8 on the engine board measures approximately 0 V dc. If incor- rect, turn the printer power off and measure the resistance between ground and CN9-8. Be sure the resistance measures 0 ohms. If incorrect, be sure the tray two cable measures continuity. If incorrect, replace the cable. If correct, replace the following FRUs one at a time in the order shown: Engine Board Tray Two Sensor Board Diagnostic Information 2-31
4026-0XX
Diagnostic Information 2-31
Paper Tray Two selected in the application. Paper does not feed
from Tray Two but instead feeds from Tray One. Tray Two reset to
Tray One in printer utility.
FRU
Action
1
Engine Board
Be sure the voltage at CN9-8 on the engine
board measures approximately 0 V dc. If incor-
rect, turn the printer power off and measure the
resistance between ground and CN9-8. Be sure
the resistance measures 0 ohms. If incorrect, be
sure the tray two cable measures continuity. If
incorrect, replace the cable. If correct, replace
the following FRUs one at a time in the order
shown:
Engine Board
Tray Two Sensor Board