Lexmark Optra E Service Manual - Page 50
Optional Paper Tray Two Service Check, Wrinkled or damaged paper
View all Lexmark Optra E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
4026-0XX Optional Paper Tray Two Service Check Check the following before servicing tray two: • Be sure tray one is working correctly. • Be sure the second paper tray is correctly installed and the sec- ond paper tray connector on the base printer properly contacts the second paper tray connector in the second paper tray. • Be sure the second paper tray is selected in the user's applica- tion and no other application is on the selected port. • Be sure the base printer and tray two connectors are not dam- aged. • Be sure the second paper tray drive gear in the base printer operates correctly. • Check the paper feed frame assembly for any obstruction or damage in the area of the second paper tray feed slot that can cause the paper to catch or jam. Note: Only paper can feed from tray two. Envelopes, label sheets, and transparencies must feed from tray one or manual feed. Wrinkled or damaged paper FRU Action 1 Paper Check the paper supply for wrinkled, damaged or out of specification paper. Correct as necessary. 2 Paper Path Check the paper feed lift plate assembly, paper empty flag, paper separators, paper feed rollers or anything in the paper path that might catch the paper or cause the paper to wrinkle. Paper fails to leave Paper Tray Two - Solenoid never picks FRU 1 Paper Action Check the paper supply for any paper that may cause a problem. 2-28