Lexmark Optra E Service Manual - Page 64
Excessive Background, White Spots, Light Print
View all Lexmark Optra E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
4026-0XX Excessive Background Note: Poor development or poorly charged toner particles causes excessive background. This is more noticeable as the toner cartridge nears end of life. FRU Action 1 Toner Car- Be sure the toner cartridge and photoconductor tridge, Photo- unit are installed correctly. If installed correctly, conductor try a new toner cartridge and then a new photo- Unit conductor unit. If a new toner cartridge or photo- conductor unit does not correct the problem, replace the following FRUs one at a time in the order shown: HVPS Engine board White Spots FRU 1 Transfer Assembly Light Print Action Check the transfer assembly for any signs of broken parts, pitting, contamination or foreign objects attached to or in the area of the transfer roll. If no problem is found, replace the following FRUs one at a time in the order shown: Transfer Assembly HVPS FRU Action 1 Photoconduc- Be sure the photoconductor unit is correctly tor Unit installed. Check the cartridge for damage and pitted or contaminated contacts. If no problem is found, replace the photoconductor unit. 2-42