Lexmark Optra E Service Manual - Page 77
Configuration Mode, Diagnostic Aids 3-10, Configuration Mode Operator Panel Overlay
View all Lexmark Optra E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
4026-0XX Configuration Mode The configuration mode gives the ability to set the following printer functions through the operator panel: Hex Trace NPA Mode (Parallel) Parallel Protocol Advanced Status PPDA Activated Auto CRLF/LFCR Perform the following steps to enter the configuration mode: 1. Turn the printer power off. 2. Open the top cover. 3. Turn the printer power on. 4. Top Cover Open (Error LED on) is displayed on the operator panel. 5. Double-click the operator panel button. 6. The printer is in the configuration mode. The Ready LED is on solid. The Data, Load Paper, Paper Jam, Error and Press Button are off. Note: Closing the top cover causes the printer to exit the configuration mode. Repeat the steps to reaccess the configuration mode. Configuration Mode Operator Panel Overlay The following overlay indicates the operator panel LED and button designations when in the configuration mode. Hex Trace NPA Mode Parallel Protocol Advance Status CRLF/LFCR Off/On/Auto Press three seconds to save Diagnostic Aids 3-10