Lexmark Optra E Service Manual - Page 31
Diagnostic Information 2-9, Switch to Print Accel - plus windows 7
View all Lexmark Optra E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
4026-0XX User Error Message Resolution Reduction Data Transmission Error Flash Memory Full LED Status Ready, Data blinking and the Error, Press Button on solid Data, Error, and Press Button on solid Error blinking and Press Button on solid Action Switch from the GL/2 or raster mode to Quick Print Plus mode using the Lexmark driver for Windows, or press the operator panel button to resume printing, or do a front panel reset by pressing and holding the operator button for more than three seconds. Switch to Print Accelerator using the Lexmark driver for Windows if 2MB of memory or more is installed, or switch to the GL/2 printing mode using the Lexmark driver for Windows, or push the operator panel button to resume printing, or do a front panel reset by pressing and holding the operator panel button for more than three seconds. This condition only occurs when the Flash memory is full. Diagnostic Information 2-9