Lexmark Optra E Service Manual - Page 66
Registration Service Check, Transfer Assembly Service Check
View all Lexmark Optra E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
4026-0XX Registration Service Check Note: Use the Service Test Page to check the registration. FRU Action 1 Paper Be sure the paper is correctly installed in the paper tray. 2 Registration Perform the registration adjustment when the Adjustment engine board is replaced. Transfer Assembly Service Check Note: The transfer assembly left and right transfer bracket springs bias the transfer assembly toward the photoconductor unit. Be sure the transfer assembly is free to move and biased toward the photoconductor unit. FRU 1 Transfer Assembly Action Be sure the transfer assembly is correctly installed and the left and right transfer brackets are properly positioned and fastened. Be sure the left and right transfer bracket springs are correctly installed and the transfer assembly is free to move. Check the transfer roll for toner buildup or damage. Check the transfer roll drive gear for damage or broken teeth. Check the transfer roll for binds or improper operation and the right side contact for damage. Replace the transfer assembly as necessary. Replace the transfer assembly if you have a horizontal black bar 57 mm from the top of page. Check the Transfer Leakage board, wiring, contacts and transfer roll for signs of damage or poor contact. 2-44