Lexmark T614 Setup Guide (1.4 MB) - Page 12

Installing an Output Expander Tray Optra T label (colored triangle) Labels Each output expander consists of the expander and a removable tray. A paper bail, bracket, and labels are also included. After you carefully unpack the output expander, install it immediately; otherwise, the edges of the mounting brackets could damage tabletops or fabrics. Bracket and bail Warning! The output expander tray is designed to hold the weight of print material only. Do not use it as a shelf; excess weight may cause it to disengage from the output expander. 1 Remove the top cover from the printer or previously installed output option. 2 Slide the plastic bracket onto the static brush holder, located near the bottom of the output expander. 10 Install Paper Options and Printer