Lexmark T614 Setup Guide (1.4 MB) - Page 15

Mounting bracket Mounting slot 3 Insert the mounting brackets into the slots on top of the printer, output expander or 5bin mailbox. Make sure the 5-bin mailbox is seated securely. Note: If the 5-bin mailbox will be the topmost output option, remove the paper bail from the bracket on the top cover and store in a safe place. 4 Attach the top cover to the 5-bin mailbox. Paper stops Note: Do not attach the paper bail unless you are mounting the 5-bin mailbox on the printer or an output expander. 5 Place the tips of the wire paper bail into the ends of the plastic bracket so that the bail curves downward. The bail rests in the output tray of the expander below it, or in the printer output bin. 6 Adjust the paper stops for the paper size you will use. Attaching Labels to Output Expanders and 5-Bin Mailboxes Labels If you purchased an output expander or 5-bin mailbox, you received a sheet of labels. These labels are provided so that you may label your various output bins. The illustration indicates some places where you may attach the labels: output bin tray, paper stop, side cover, or wherever best suits your application. Paper stop Side cover Install Paper Options and Printer 13