Lexmark T614 Setup Guide (1.4 MB) - Page 21

Step 3: Load Paper Length guide lever Loading a Paper Tray Squeeze here Length guide Width guide Complete these instructions to load print materials into any of the standard or optional trays. All paper trays are loaded in the same way. 1 Remove the paper tray. 2 Squeeze the width guide lever and slide the width guide to the far right side of the tray. 3 Squeeze the length guide lever and slide the length guide to the correct position for the size paper you are loading. Paper size indicators . Paper capacity mark Squeeze here Width guide 4 Place the paper into the paper tray with the recommended print side face down for single-sided printing and face up for doublesided printing. Do not fill paper above the paper capacity mark (fill line). 5 Squeeze the width guide lever and slide the width guide to the left until it lightly rests against the edge of the paper stack 6 Adjust the knob to show the size of the paper currently loaded. Note: This setting serves as a visual reminder only; it has no effect on the operation of the printer. 7 Reinstall the tray. Knob Load Paper 19