Lexmark T620 Setup Guide - Page 23

Installing an option card MarkNet internal print server MarkNet N2501e or N2401e Tri-Port adapter USB/Parallel 1284-C interface card hard disk with adapter Your printer has two connectors that support the following option cards: • Hard disk with adapter card • MarkNet™ internal print server • USB/Parallel 1284-C Interface Card • Parallel 1284-C Interface Card • Coax/Twinax Adapter for SCS • Tri-Port Adapter Refer to the documentation included with each card for detailed information about that specific card. You need a small Phillips screwdriver to install these options. Note: The Lexmark T622n model ships with an Ethernet print server already installed. Warning! Electronic components are easily damaged by static electricity. Touch something metal on the printer before you touch the card. Connector 1 Connector 2 1 Follow the steps in "Accessing the printer system board" beginning on page 17. 2 Locate the card connectors on the system board. If you are installing only one card, install it in connector 1. If you are installing two cards on a model with multiple connectors, use connector 1 first and then connector 2. 3 Locate the two screws on the back of the printer that attach the metal plate to the slot. 4 Remove and save the two screws. Remove and discard the plate. 5 Unpack the card. Save the packaging materials. 21