Lexmark T620 Setup Guide - Page 7

Installing a 250-sheet or 500-sheet drawer, unit, or the printer - paper tray

Page 7 highlights

Tray labels Installing a 250-sheet or 500-sheet drawer Paper drawers attach under the printer and optional duplex unit. The printer automatically recognizes any drawer that has been installed. A drawer consists of a paper tray and a support unit. The 250-sheet drawer and the 500-sheet drawer are installed the same way. Lexmark T Family label (colored triangle) 1 Remove the tray from the support unit. Remove all packing material and tape from both the support unit and the tray. Support unit Paper tray Tab Square hole Round peg 2 Place the support unit on top of any previously installed paper drawers, or the table or printer cabinet where you plan to use the printer. The tab, round peg, and square holes on top of any drawer help you seat the support unit so the edges are aligned properly. Make sure the support unit is securely in place. 3 Attach another optional drawer, a duplex unit, or the printer: • To attach a drawer, repeat steps 1 and 2. • To attach a duplex unit, see "Installing a duplex unit" on page 6. • To attach the printer, see "Setting up the printer" on page 7. 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38

5
Installing a 250-sheet or
500-sheet drawer
Paper drawers attach under the printer and
optional duplex unit. The printer automatically rec-
ognizes any drawer that has been installed.
A drawer consists of a paper tray and a support
unit. The 250-sheet drawer and the 500-sheet
drawer are installed the same way.
1
Remove the tray from the support unit.
Remove all packing material and tape from
both the support unit and the tray.
2
Place the support unit on top of any
previously installed paper drawers, or the
table or printer cabinet where you plan to
use the printer.
The tab, round peg, and square holes on top
of any drawer help you seat the support unit
so the edges are aligned properly. Make
sure the support unit is securely in place.
3
Attach another optional drawer, a duplex
unit, or the printer:
To attach a drawer, repeat steps 1 and 2.
To attach a duplex unit, see
Installing a
duplex unit
on page 6.
To attach the printer, see
Setting up the
printer
on page 7.
Lexmark T Family label
(colored triangle)
Tray labels
Paper tray
Support unit
Tab
Round peg
Square hole