Lexmark X925 User's Guide - Page 162
AppleTalk menu, Standard USB menu, Network/Ports, Standard Network, Network [x], Network [x] Setup
View all Lexmark X925 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Understanding printer menus 162 Menu item Compatibility 802.11b/g/n 802.11n 802.11b/g Choose Network [list of available networks] View Signal Quality View Security Mode Description Specifies the wireless standard for the wireless network Note: The 802.11b/g/n is the factory default setting. Lets you select an available network for the printer to use Lets you view the quality of the wireless connection Lets you view the encryption method that a wireless network uses Note: Wi-Fi Protected Setup (WPS) is a simple and secure configuration that allows you to establish a wireless network and enable network security without requiring prior knowledge of Wi‑Fi technology. It is no longer necessary to configure the network name (SSID) and WEP key or WPA passphrase for network devices. AppleTalk menu This menu is available from the Network/Ports menu: Network/Ports > Standard Network or Network [x] > Standard Network Setup or Network [x] Setup > AppleTalk Menu item Description Activate Yes No Activates AppleTalk support Note: Yes is the factory default setting. View Name Shows the assigned AppleTalk name Note: The name can be changed only from the Embedded Web Server. View Address Shows the assigned AppleTalk address Note: The address can be changed only from the Embedded Web Server. Set Zone Provides a list of AppleTalk zones available on the network [default] Note: When "default" is selected, the printer uses the AppleTalk zone that the [list of zones available on the network] router identifies as the default zone for the network. If no default zone exists, then the zone marked with an * is the default setting. Standard USB menu Menu item PCL SmartSwitch On Off Description Sets the printer to automatically switch to PCL emulation when a print job received through a USB port requires it, regardless of the default printer language Notes: • On is the factory default setting. • When set to Off, the printer does not examine incoming data. The printer uses PostScript emulation if the PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if the PS SmartSwitch is set to Off.