Lexmark X925 User's Guide - Page 210

Understanding printer menus 210 Menu item Negative Image Off On Shadow Detail ‑4 to 4 ADF Skew Fix Off On Scan edge to edge Off On Sharpness 1-5 Temperature ‑4 to 4 Description Creates a negative image of the original document Note: Off is the factory default setting. Adjusts the amount of shadow detail visible on a scanned image Note: 0 is the factory default setting. Specifies whether or not to fix slight skew on the scanned image Note: Off is the factory default setting Specifies whether the original document is scanned edge-to-edge Note: Off is the factory default setting. Adjusts the amount of sharpness on a scanned image Note: 3 is the factory default setting. Enables the user to specify "warm" or "cool" outputs. "Cool" values generate a bluer output than the default while "warm" values generate a redder output than the default. Print Settings Copies 1-999 Paper Source Tray [x] MP Feeder Manual Paper Manual Envelope Color Color Black Only Collate On (1,2,1,2,1,2) Off (1,1,1,2,2,2) Sides (Duplex) 1 sided 2 sided Duplex Binding Long Edge Short Edge Specifies a default number of copies for each print job Note: 1 is the factory default setting. Sets a default paper source for all print jobs Note: Tray 1 is the factory default setting. Generates color print jobs output Note: Color is the factory default setting. Stacks the pages of a print job in sequence when printing multiple copies Note: On is the factory default setting. Specifies whether prints are on one side or on both sides of the page Note: 1 sided is the factory default setting. Defines the way duplexed pages are bound and how the printing on the back of the page is oriented in relation to the printing on the front of the page Notes: • Long edge assumes binding along the long edge of the page (left edge for portrait and top edge for landscape). • Short edge assumes binding along the short edge of the page (top edge for portrait and left edge for landscape).