LiftMaster EL2000 EL25-KEYPAD PROGRAMMING Manual - Page 17
Enter Programming Mode
View all LiftMaster EL2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Programming Single Unit Overview Programming Single Unit Overview *** Enter Programming Mode If you will be programming the unit via modem, please refer to the Versa XS online help. Important: After entering programming mode for the first time, we suggest you change the password to maintain the security of your system (see page 56). From the Keypad: 1 Press 2 Enter the (6) six-digit password. The default is six zeroes. Voice Feedback The unit is now ready to accept programming instructions! From the Residence Telephone: 1 When you lift the receiver, press NOTE: If multiple units are sharing the same phone line, then a Unit ID Code (1-7) will need to be entered at this time. See page 20 for more information about Multiple Unit Sites. 2 Enter the (6) six-digit password. The default is six zeroes. 3 Press and the audio tone will stop. The unit is now ready to accept programming instructions! From the Remote Telephone: 1 Dial the unit's phone number: Note: If the unit and an answering machine (or answering service) utilize the same phone line, let the line ring at least (2) two times, hang-up, and call back within one (1) minute. The unit will answer on the second call. If the unit does not answer, you may need to change the ring count (see page 58). 2 When the unit picks up the call, you will hear the audio message: "Please enter password" 3 Press NOTE: If multiple units are sharing the same phone line, then a Unit ID Code (1-7) will need to be entered at this time. See page 20 for more information about Multiple Unit Sites. 4 Enter the (6) six-digit password. The default is six zeroes. 5 Press and the audio will stop. The unit is now ready to accept programming instructions! Exit Programming Mode 0 • Press on the unit keypad and the unit will respond with audio feedback when disconnecting. • Press on the telephone and the unit will respond with audio feedback when disconnecting. Press when using a telephone or the unit to cancel programming sequence and exit programming mode. Page 16