LiftMaster EL2000 EL25-KEYPAD PROGRAMMING Manual - Page 60

Set a Phone Number’s Extension Delay Time: 110, Speaker / Microphone Settings

Get LiftMaster EL2000 PDF manuals and user guides View all LiftMaster EL2000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 60 highlights

Communications To and From Unit Communications To and From Unit Set a Phone Number's Extension Delay Time: 110 When the unit is programmed to dial a resident with a phone number and extension, and needs to be entered a short time after the automated phone system's greeting message has finished, the unit allows a delay time, between the phone number and the extension number or call forward extension number. Factory Setting: No Delays 1 Press Then 2 Enter Directory Code (Up to 2 Digits). Then (#) 3 Enter Phone Extension Delay (0-30 seconds). Then (#) 4 Enter Call Forward Extension Delay (0-30 seconds). Then (#) Example: 1 2 3 4 Gives Directory Code "7" a 10 second Delay between its phone number and extension number. Speaker / Microphone Settings Set Speaker Volume: 18 Allows the visitor to hear the resident at the unit. Factory Setting: 5, 2, 2 1 Press Then 2 Enter Speaker Level (0=Mute, 1=Low through 10=Highest). Then (#) 3 Enter Voice Audio Level (0=Mute, 1=Low through 3=Highest). Then (#) 4 Enter Beep Audio Level (0=Mute, 1=Low through 3=Highest). Then (#) NOTE: The visitor can adjust the speaker volume on unit with this key. Unit will return to programmed volume setting when call is complete. Set Microphone Volume: 19 Allows the resident to hear the visitor at the unit. Factory Setting: 5 1 Press Then 2 Enter Microphone Level (0=Mute, 1=Low through 10=Highest). Then (#) Enable or Disable Call Waiting 9 If you're on your phone and a visitor attempts to contact you from the unit, you will hear 2 short tones in your phone. You can press "2" on your phone to toggle between the phone call and the visitor. This feature only works for a single-family residence or a manager's phone sharing a phone line with the unit. Factory Setting: Enabled 1 Press Then Example: 2 Enable (1) or Disable (0). Then (#) 1 2 Disables the call waiting. If you make an error during an entry, press the asterisk key (*) to begin again. Page 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Page 59
Communications To and From Unit
Communications To and From Unit
Set a Phone Number’s Extension Delay Time:
1
Press
Then
2
Enter Directory Code (Up to 2 Digits). Then (#)
3
Enter Phone Extension Delay (0-30 seconds). Then (#)
4
Enter Call Forward Extension Delay (0-30 seconds). Then (#)
When the unit is programmed to dial a resident with a phone number and extension, and
needs to be entered a short time after the automated phone system’s greeting message has
finished, the unit allows a delay time, between the phone number and the extension number
or call forward extension number.
Factory Setting: No Delays
Example:
Gives Directory Code "7" a 10 second Delay between its phone number and extension number.
1
2
3
4
Set Speaker Volume:
1
Press
Then
2
Enter Speaker Level (0=Mute, 1=Low through 10=Highest).
Then (#)
3
Enter Voice Audio Level (0=Mute, 1=Low through 3=Highest).
Then (#)
4
Enter Beep Audio Level (0=Mute, 1=Low through 3=Highest).
Then (#)
Allows the visitor to hear the resident at the unit.
Factory Setting: 5, 2, 2
Speaker / Microphone Settings
NOTE:
The visitor can
adjust the speaker
volume on unit with this
key. Unit will return to
programmed volume
setting when call is
complete.
Set Microphone Volume:
1
Press
Then
2
Enter Microphone Level (0=Mute, 1=Low through 10=Highest). Then (#)
Allows the resident to hear the visitor at the unit.
Factory Setting: 5
Enable or Disable Call Waiting
If you’re on your phone and a visitor attempts to contact you from the unit, you will hear 2
short tones in your phone. You can press "2" on your phone to toggle between the phone
call and the visitor. This feature only works for a single-family residence or a manager’s
phone sharing a phone line with the unit.
Factory Setting: Enabled
1
Press
Then
2
Enable (
1
) or Disable (
0
). Then (#)
Example:
Disables the call waiting.
1
2
If you make an error during an entry, press the asterisk key (*) to begin again.
110
18
19
9