LiftMaster EL2000 EL25-KEYPAD PROGRAMMING Manual - Page 32

Delete ALL Directory Codes: 201 This will delete ALL Directory Codes from unit. Important: Once you delete the Directory Codes, you cannot retrieve them unless they are saved in Versa XS. 1 Press Then 2 Enter Then Directory Codes Directory Codes Enable or Disable Do Not Disturb Schedule 10 Do Not Disturb (DnD) Schedules prevent visitors from calling residents during specified time frames. To assign a DnD Schedule to a Directory Code, use the programming step for adding/editing a full function Directory Code (see page 29). When enabling/disabling DnD Schedule for a Directory Code, the system will remember the schedule assigned to the code. Factory Setting: Disabled 1 Press Then 2 Enter the Directory Code to be enabled or disabled. Then (#) 3 Enable (1) or Disable (0). Then (#) Example: 1 2 3 Disables the Do Not Disturb schedule for Directory Code "34". Enable or Disable Call Forwarding (Directory Calls) 46 Call Forwarding redirects visitor calls to another telephone number instead of the regular phone number. During a Call Forwarding call, the visitor will hear normal telephone line sounds but will not hear the number being dialed. You can Enable or Disable the Call Forwarding Feature for a specific Directory Code (Dial-Out). Factory Setting: Disabled 1 Press Then 2 Enter Directory Code (1-4 digits). Then (#). 3 Enable (1) or Disable (0). Call Forwarding. Then (#). 3 Enter Call Forward Schedule (0-63). Then (#) 0=Never Use Call Forward Number 1=Use Call Forward Number 5 Only Enter New Call Forward Phone Number (up to 20 digits). Then (#) (Skip this step to keep existing Call Forward Phone Number) 5A Enter Call Forward Phone Extension (up to 5 digits). Then (#) (If using an extension the unit MUST have a phone number). Example: Factory Call Forwarding Enable or Disable = 0 Settings Call Forwarding Schedule = 0 1 2 3 4 5 5A Enables Call Forwarding number 555-3662 for Directory Code "14" with a use schedule of "2". Page 31