Linksys EFG250 /en/US/docs/storage/nass/csbcdp/efg250/user/guide/EFG250_V2_use - Page 16

Dynamic IP Address, Fixed IP Address, Server Name, IP Address., Subnet Mask., Gateway. - setup

Get Linksys EFG250 - EtherFast NAS Server PDF manuals and user guides
UPC - 745883559220
View all Linksys EFG250 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

EtherFast Network Attached Storage (250GB with PrintServer) 5. The next screen that appears has the Network Attached Storage's IP settings. Select Dynamic IP Address if you already have a DHCP server, such as a router, assigning IP addresses to your network devices. Select Fixed IP Address if you will set the Network Attached Storage's IP address and network information. Click the Next button to proceed or the Back button to return to the previous screen. 6. If you selected Dynamic IP Address, proceed to step 7. If you selected Fixed IP Address, then enter the following information: • Server Name. Enter a descriptive name for the Network Attached Storage. This is especially helpful if you have more than one storage device attached to your network. • IP Address. Enter the Network Attached Storage's IP Address here, making sure that it is on the same LAN segment as the PC running the Setup Wizard. • Subnet Mask. Enter the Subnet Mask in the fields. It must match the Subnet Mask of the other devices on your network. It is set by default to 255.255.255.0. • Gateway. Enter the IP address of your network gateway, which is usually your router. Click the Next button to proceed or the Back button to return to the previous screen. Figure 4-3: IP Settings Screen Figure 4-4: Fixed IP Address Screen Chapter 4: Setting Up the Network Attached Storage 9 Setup Wizard

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
9
Chapter 4: Setting Up the Network Attached Storage
Setup Wizard
EtherFast Network Attached Storage (250GB with PrintServer)
5.
The next screen that appears has the Network Attached Storage’s IP settings. Select
Dynamic IP Address
if
you already have a DHCP server, such as a router, assigning IP addresses to your network devices. Select
Fixed IP Address
if you will set the Network Attached Storage’s IP address and network information. Click
the
Next
button to proceed or the
Back
button to return to the previous screen.
6.
If you selected Dynamic IP Address, proceed to step 7. If you selected Fixed IP Address, then enter the
following information:
•
Server Name
. Enter a descriptive name for the Network Attached Storage. This is especially helpful if you
have more than one storage device attached to your network.
•
IP Address.
Enter the Network Attached Storage’s IP Address here, making sure that it is on the same
LAN segment as the PC running the Setup Wizard.
•
Subnet Mask.
Enter the Subnet Mask in the fields. It must match the Subnet Mask of the other devices
on your network. It is set by default to
255.255.255.0
.
•
Gateway.
Enter the IP address of your network gateway, which is usually your router.
Click the
Next
button to proceed or the
Back
button to return to the previous screen.
Figure 4-3: IP Settings Screen
Figure 4-4: Fixed IP Address Screen