Linksys EFG250 /en/US/docs/storage/nass/csbcdp/efg250/user/guide/EFG250_V2_use - Page 49
Administration, Advanced, Format Disk 2
UPC - 745883559220
View all Linksys EFG250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
EtherFast Network Attached Storage (250GB with PrintServer) 14. Click the Administration tab and then the Advanced tab. 15. click the Disk tab. 16. In the Format Disk section, Disk 2 will display its status as "Not Formatted." To format your new hard drive, click the Format Disk 2 button. IMPORTANT: Formatting a hard drive will delete all data on that drive. Always verify that you do not wish to save any data on a drive before formatting it. 17. After the hard drive has been formatted, it will be ready for use. Congratulations! The installation of your second hard drive is complete. Appendix B: Installing a Second Hard Drive Figure B-7: Format Disk 2 42
42
Appendix B: Installing a Second Hard Drive
EtherFast Network Attached Storage (250GB with PrintServer)
14. Click the
Administration
tab and then the
Advanced
tab.
15. click the
Disk
tab.
16. In the
Format Disk
section, Disk 2 will display its status as “Not Formatted.” To format your new hard drive,
click the
Format Disk 2
button.
17. After the hard drive has been formatted, it will be ready for use.
Congratulations! The installation of your second hard drive is complete.
IMPORTANT:
Formatting a hard drive will delete all data on that drive. Always verify that you
do not wish to save any data on a drive before formatting it.
Figure B-7: Format Disk 2