Linksys EFG250 /en/US/docs/storage/nass/csbcdp/efg250/user/guide/EFG250_V2_use - Page 47
B-3: Make Sure Connections, are Tight, B-4: Insert Screw through Left Side, of Tray
UPC - 745883559220
View all Linksys EFG250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
EtherFast Network Attached Storage (250GB with PrintServer) 6. Check the connections. Make sure these connections are tight before securing the drive to the tray. 7. Insert a screw through the tray's left side and into your hard drive. Tighten it to secure the drive to the tray. Figure B-3: Make Sure Connections are Tight Figure B-4: Insert Screw through Left Side of Tray Appendix B: Installing a Second Hard Drive 40
40
Appendix B: Installing a Second Hard Drive
EtherFast Network Attached Storage (250GB with PrintServer)
6.
Check the connections. Make sure these connections are tight before securing the drive to the tray.
7.
Insert a screw through the tray’s left side and into your hard drive. Tighten it to secure the drive to the tray.
Figure B-3: Make Sure Connections
are Tight
Figure B-4: Insert Screw through Left Side
of Tray