Marantz SR4600 SR4600 User Manual - Page 21

Speaker Setup

Page 21 highlights

ENGLISH 5. If you finish these setup, press the or cursor button to select "TO MAIN MENU" then press the ENTER button to return the SETUP MENU. Or press the or cursor button to select "EXIT" then press the ENTER button to exit the SETUP MENU. Notes: • When a DTS-LD or DTS-CD is playing, this setup is not available. This is to avoid noise being generated from the analog input. • If "Dx-AUTO" is selected and a DVD, compact disc or LD is fast forwarded during playback, decoded signals may produce a skipping sound. In such cases, change the setting to DIGITAL. • Same digital input function cannot be set. In this case, the previous setting is set to ANALOG. Same digital input number cannot be set in Digital AUTO mode and Digital Fixed mode. For example, D1AUTO and DIG.1 are not set at same time. • The TUNER is fixed to the analog input, and can not be selected for any digital input. 2. SPEAKER SETUP After you have installed the SR4600, connected all the components, and determined the speaker layout, it is now time to perform the settings in the Speaker Setup menu for the optimum sound acoustics for your environment and speaker layout. Before you perform the following settings, it is important that you first determine the following characteristics: 2-1. SPEAKERS SIZE When setting the speaker size in the SPEAKER SIZE sub-menu, use the guidelines given below. Large: The complete frequency range for the channel you are setting will be output from the speaker. Small: Frequencies of the channel you are setting lower than approx. 100Hz will be output from the subwoofer. If the Subwoofer is set to "NONE" and the front speakers are set to "Large," then the sound may be output from both the left and right speakers. 1. 3. 5. 4. 5. 2. 5. ND RECEIVER SR4600 DISP MULTI AUTO TUNED ST V - OFF NIGHT PEAK ATT ANALOG SURROUND SLEEP AUTO SURR DIRECT DISC 6.1 MTX 6.1 EQ DIGITAL DIGITAL LCR AAC PCM LFE SL S SR D EAKER NES SURROUND MODE PURE DIRECT SIMPLE SETUP AUTO HT-EQ MENU ENTER DISPLAY MEMORY CLEAR EXIT BAND T-MODE 4. 5. TV VOL. SLEEP MUTE MAIN VOL. OSD MENU 1. 3. 5. ENTER SET UP/ T.TONE PURE DIRECT AUTO MENU OFF DTS 2. 5. 1. Select "2.SPEAKER" in SETUP MENU with or cursor button, 2. Press the ENTER button to enter the menu. The first sub-menu item is "2-1.Speakers Size" setup. 3. Press or cursor button to select the each speaker. 4. Press or cursor button to select the setting of size to each speaker. 5. If you finish these setup, press the or cursor button to select "NEXT". 6. Press the ENTER button to enter the next "2- 2. Speakers Distance" setup. Or press the or cursor button to select "EXIT" then press the ENTER button to exit the SETUP MENU. Or press the or cursor button to select "TO MAIN MENU" then press the ENTER button to return the SETUP MENU. MENMUESNTURSUTCRTUUCRTEURoEf Sopf eSapkeearkserSsizSeizseesteutpup 2-1. SPEAKERS SIZE setup Speakers SUBW Size YES Select when a subwoofer is connected. NONE Select when a subwoofer is not connected. L & R CENTER LARGE Select if the front speakers are large sized. SMALL Select if the front speakers are small sized. SMALL Select if the center speaker is small sized. LARGE Select if the center speaker is large sized. NONE Select if no center speaker is connected. SL & SR SB SMALL Select if the surround left and right speakers are small sized. LARGE Select if the surround left and right speakers are large sized. NONE 1CH 2CH Select if no surround left and right speakers are connected. Select if the surround back speaker is connected In this case, the audio signal is emitted form the Surround back L output terminal. Select if the surround back left and right speakers are connected NONE Select if no surround back speaker is connected SB SIZE SMALL Select if the surround back speaker(s) is small sized LARGE Select if the surround back speaker(s) is large sized *** This menu (SB SIZE) will not be displayed, if SB is set "NONE". LPF/HPF 80 Select this when the bass speaker is about 12cm(4 3/4inches) 100 Select this when the bass speaker is about 10cm(3 15/16inches) NEXT 120 Select this when the bass speaker is about 8cm(3 3/16inches) EXIT TO MAIN MENU Speakers Distance setup exit SETUP MENU MAIN MENU 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41

ENGLISH
18
5.
If you finish these setup, press the
or
cursor button to select “TO MAIN MENU” then
press the
ENTER
button to return the SETUP
MENU.
Or press the
or
cursor button to select
“EXIT” then press the
ENTER
button to exit
the SETUP MENU.
Notes:
When a DTS-LD or DTS-CD is playing, this setup
is not available. This is to avoid noise being
generated from the analog input.
If
Dx-AUTO
is selected and a DVD, compact
disc or LD is fast forwarded during playback,
decoded signals may produce a skipping sound. In
such cases, change the setting to DIGITAL.
Same digital input function cannot be set. In this
case, the previous setting is set to ANALOG. Same
digital input number cannot be set in Digital AUTO
mode and Digital Fixed mode. For example,
D1AUTO and DIG.1 are not set at same time.
The TUNER is fixed to the analog input, and can
not be selected for any digital input.
2. SPEAKER SETUP
After you have installed the SR4600, connected all
the components, and determined the speaker layout,
it is now time to perform the settings in the Speaker
Setup menu for the optimum sound acoustics for
your environment and speaker layout.
Before you perform the following settings, it is
important that you first determine the following
characteristics:
2-1. SPEAKERS SIZE
When setting the speaker size in the SPEAKER
SIZE sub-menu, use the guidelines given below.
Large:
The complete frequency range for the channel
you are setting will be output from the speaker.
Small:
Frequencies of the channel you are setting
lower than approx. 100Hz will be output from the
subwoofer.
If the Subwoofer is set to “NONE” and the front
speakers are set to “Large,” then the sound may
be output from both the left and right speakers.
Speakers
Size
Select when a subwoofer is connected.
Select if the front speakers are large sized.
Select if the center speaker is small sized.
Select when a subwoofer is not connected.
Select if the front speakers are small sized.
Select if the center speaker is large sized.
Select if no center speaker is connected.
Select if no surround left and right speakers are connected.
Select if the surround left and right speakers are large sized.
Select if the surround left and right speakers are small sized.
YES
NONE
LARGE
SMALL
SMALL
L & R
CENTER
LARGE
NONE
SMALL
LARGE
NONE
SL & SR
Select if no surround back speaker is connected
Select if the surround back left and right speakers are connected
Select if the surround back speaker is connected
2CH
NONE
SB
Select if the surround back speaker(s) is large sized
This menu (SB SIZE) will not be displayed, if SB is set "NONE".
Select if the surround back speaker(s) is small sized
SMALL
LARGE
***
SB SIZE
Select this when the bass speaker is about 8cm(3 3/16inches)
Select this when the bass speaker is about 10cm(3 15/16inches)
Select this when the bass speaker is about 12cm(4 3/4inches)
80
100
120
LPF/HPF
SUBW
2-1. SPEAKERS SIZE
setup
1CH
MAIN MENU
exit SETUP
MENU
Speakers Distance
setup
TO MAIN
MENU
EXIT
NEXT
In this case, the audio signal is emitted form
the Surround back L output terminal.
1.
Select “2.SPEAKER” in SETUP MENU with
or
cursor button,
2.
Press the
ENTER
button to enter the menu.
The first sub-menu item is “2-1.Speakers Size”
setup.
3.
Press
or
cursor button to select the each
speaker.
4.
Press
or
cursor button to select the setting
of size to each speaker.
5.
If you finish these setup, press the
or
cursor button to select “NEXT”.
6.
Press the
ENTER
button to enter the next “2-
2. Speakers Distance” setup.
Or press the
or
cursor button to select
“EXIT” then press the
ENTER
button to exit
the SETUP MENU.
Or press the
or
cursor button to select “TO
MAIN MENU” then press the
ENTER
button to
return the SETUP MENU.
DTS
PURE DIRECT
AUTO
T.TONE
MENU OFF
SET UP/
MENU
OSD
VOL.
TV
VOL.
MAIN
SLEEP
MUTE
ENTER
4. 5.
2. 5.
1. 3. 5.
MENU STRUCTURE of Speakers Size setup
SURROUND
ND RECEIVER SR4600
D
NES
EAKER
PURE
SETUP
DIRECT
SIMPLE
AUTO
HT-EQ
MENU
ENTER
DISPLAY
MEMORY
CLEAR
T-MODE
EXIT
BAND
MODE
DISP
MULTI
AUTO
TUNED
ST
V
OFF
NIGHT
PEAK
ANALOG
DIGITAL
ATT
SLEEP
SURR
AUTO
DIRECT
DISC 6.1
MTX 6.1
EQ
DIGITAL
SURROUND
AAC
PCM
L
R
4. 5.
2. 5.
1. 3. 5.