Marantz SR4600 SR4600 User Manual - Page 8

ENGLISH FL DISPLAY sd a g j l ¡1 ¡3 f h k ¡0 ¡2 ¡4 ¡4 SIGNAL FORMAT indicators 2 DIGITAL, EX, 2 SURROUND, dts, ES, 96/24, PCM When the selected input is a digital source, some of these indicators will be illuminated to display the specific type of signal in use. DISP AUTO TUNED ST V - OFF NIGHT PEAK ATT ANALOG ¡7 SLEEP AUTO SURR DIRECT DISC 6.1 MT X 6.1 SPKR B EQ DIGITAL PCM SURROUND DIGITAL LCR LFE SL S SR ¡6 ¡8 ¡5 a DISP (Display Off) indicator This indicator is illuminated when the SR4600 is in the display off condition. s SLEEP timer indicator This indicator is illuminated when the sleep timer function is active. d AUTO SURR (Auto Surround mode) indicator This indicator is illuminated to show that the AUTO SURROUND mode is in use. f TUNER's indicators AUTO : This indicator illuminates when the tuner's Auto mode is in use. TUNED : This indicator illuminates when a station is being received with sufficient signal strength to provide acceptable listening quality. ST(Stereo) : This indicator illuminates when an FM station is being tuned into stereo condition. g DTS-ES mode indicators (DISC6.1, MTX6.1) These indicators will illuminate to show the DTSES decoding mode (Discrete 6.1 or Matrix 6.1). h V (video)-OFF mode indicator This indicator is illuminated when the Video-OFF function is active. j NIGHT mode indicator This indicator is illuminated when the SR4600 is in the Night mode, which reduces the dynamic range of digital program material at low volume levels. k SPKR (Speaker) B indicator This indicator is illuminated when the S(Surround) speaker B system is active. l PEAK indicator This indicator is a monitor for an analog audio input signal. If the selected analog audio input signal is greater than the capable level of internal processing, this will illuminate. If this happens, you should press the ATT button on the front panel or the remote. ¡0 EQ mode indicator This indicator is illuminated when the HT-EQ function is active. ¡1 ATT (Attenuation) indicator This indicator is illuminated when the attenuation function is active. ¡2 DIGITAL Input Indicator This indicator lights when a digital input has been selected. ¡3 ANALOG input indicator This indicator is illuminated when an analog input source has been selected. ¡5 ENCODED CHANNEL STATUS indicators These indicators display the channels that are encoded with a digital input signal. If the selected digital input signal is Dolby Digital 5.1ch or DTS 5.1ch, "L", "C", "R", "SL", "SR" and "LFE" will be illuminated. If the digital input signal is 2 channel PCM-audio, "L" and "R" will be displayed. If Dolby Digital 5.1ch signal with Surround EX flag or DTS-ES signal comes in, "L", "C", "R", "SL", "S" , "SR" and "LFE" will be illuminated. ¡6 Main Information Display This display shows messages relating to the status, input source, surround mode, tuner, volume level or other aspects of unit's operation. ¡7 DIRECT (Pure direct) indicator This indicator is illuminated when the SR4600 is in the PURE DIRECT mode. ¡8 HDCD indicator When HDCD signal is decoded from digital input, this indicator will light up. 5