Marantz SR4600 SR4600 User Manual - Page 37

ENGLISH GENERAL MALFUNCTION If the equipment malfunctions, this may be because an electrostatic discharge or AC line interference has corrupted the information in the equipment memory circuits. Therefore: - disconnect the plug from the AC line supply - after waiting at least three minutes, reconnect the plug to the AC line supply - re-attempt to operate the equipment Memory backup • In case a power outage occurs or the power cord is accidentally unplugged, the SR4600 is equipped with a backup function to prevent memory data such as the preset memory from being erased. HOW TO RESET THE UNIT AV SURROUND RECEIVER SR4600 INPUT SELECTOR DISP MULTI AUTO TUNED SLEEP AUTO SURR DIRECT ST V - OFF NIGHT PEAK ATT DISC 6.1 MT X 6.1 EQ ANALOG DIGITAL AAC PCM SURROUND DIGITAL LCR LFE SL S SR 7.1CH INPUT STANDBY POWER ON/STANDBY S. SPEAKER B PHONES SURROUND MODE PURE DIRECT SIMPLE SETUP AUTO HT-EQ MENU ENTER DISPLAY MEMORY CLEAR EXIT BAND T-MODE VOLUME DOWN MUTE UP ATT Should the operation or display seem to be abnormal, reset the unit with the following procedure. The SR4600 is turned on, press and hold the 7.1CH INPUT and ATT buttons simultaneously for 3 seconds or more. Remember that the procedure will reset the settings of the function selector, Surround mode, delay time, TUNER PRESET etc., to their initial settings. 34 TECHNICAL SPECI- FICATIONS FM TUNER SECTION Frequency Range 87.5 - 108.0 MHz Usable Sensitivity IHF 1.8 µV/16.4 dBf Signal to Noise Ratio Mono/Stereo 75/70 dB Distortion Mono/Stereo 0.2/0.3 % Stereo Separation 1 kHz 45 dB Alternate Channel Selectivity 300 kHz 60 dB Image Rejection 98 MHz 70 dB Tuner Output Level 1 kHz, ± 75 kHz Dev 800 mV AM TUNER SECTION Frequency Range 520 - 1710 kHz Signal to Noise Ratio 50 dB Usable Sensitivity Loop 400mV/m Distortion 400Hz, 30 % Mod. 0.5 % Selectivity 18 kHz 70 dB AUDIO SECTION Power Output (20 Hz - 20 kHz/THD=0.08%) Front L&R 8 ohms 80 W / Ch Center 8 ohms 80 W / Ch Surround L&R 8 ohms 80 W / Ch Surround Back L&R 8 ohms 80 W / Ch Front L&R 6 ohms 105 W / Ch Center 6 ohms 105 W / Ch Surround L&R 6 ohms 105 W / Ch Surround Back L&R 6 ohms 105 W / Ch Input Sensitivity/Impedance 168 mV/ 47 Kohms Signal to Noise Ratio(Analog Input / Pure Direct) ...... 105 dB Frequency Response (Analog Input / Pure Direct 8 Hz - 100 kHz (± 3 dB) (Digital Input / 96 kHz PCM 8 Hz - 45 kHz (± 3 dB) VIDEO Television Format NTSC Input Level/Impedance 1 Vp-p/75 ohms Output Level/Impedance 1 Vp-p/75 ohms Video Frequency Response ....... 5 Hz to 8 MHz (- 1 dB) Video Frequency (Component) ... 5 Hz to 80 MHz (- 1 dB) S/N 60 dB GENERAL Power Requirement AC 120 V 60 Hz Power Consumption 314 W Weight 26.5 lbs (12.0 Kg) ACCESSORIES Remote Control Unit RC5500SR 1 AAA-size batteries 2 FM Antenna 1 AM Loop Antenna 1 AC Power Cable 1 Specifications subject to change without prior notice. DIMENSIONS 17-5/16 ins. (440 mm) AV SURROUND RECEIVER SR4600 INPUT SELECTOR DISP MULTI AUTO TUNED SLEEP AUTO SURR DIRECT ST V - OFF NIGHT PEAK ATT DISC 6.1 MT X 6.1 EQ ANALOG DIGITAL PCM SURROUND DIGITAL LCR LFE SL S SR 7.1CH INPUT STANDBY POWER ON/STANDBY S. SPEAKER B PHONES SURROUND MODE PURE DIRECT SIMPLE SETUP AUTO HT-EQ MENU ENTER DISPLAY MEMORY CLEAR EXIT BAND T-MODE VOLUME DOWN MUTE UP ATT 11/16 ins. (16.3 mm) 5-3/4 ins. (146 mm) 6-7/16 ins. (162.3 mm) 13/16 ins. (20 mm) 13-1/2 ins. (342.5 mm) 15-3/8 ins. (387.5 mm) 1 in. (25 mm)