Marantz SR4600 SR4600 User Manual - Page 32
Ch Input Level
View all Marantz SR4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
3. If it is necessary to adjust the output level of each channel, press the CH.SEL button on the remote. Adjust the speaker output levels so that you can hear the same sound level from each speaker at the listening position. For the front left, front right, center, surround left, surround right and surround back speakers, the output levels can be adjusted between - 10 to +10 dB. The subwoofer can be adjusted between - 15 and +10 dB. These adjustments result will be stored to 7.1 CH. INPUT memory. 4. Adjust the main volume with the MAIN VOLUME knob or the VOL buttons on the remote. To cancel the 7.1 CH. INPUT setting, press the 7.1 CH INPUT button on the front panel or press 7.1 CH IN on the remote. Notes: • When the 7.1 CH. Input is in use, you may not select a surround mode, as the external decoder determines processing. • In addition, there is no signal at the record outputs when the 7.1 CH. Input is in use. 7.1 CH INPUT LEVEL This menu is to adjust the speaker levels for 7.1channel input sources. Here you will adjust the volume for each channel so that they are all heard by the listener at the same level. 1. 3. 5. 4. 5. 2. 5. MMEENNUUSSTTRURCUTCURTEUoRf E7.1oCfH7IN.1PCUHT LIENVEsLetsuetpup 7.1-L 7.1-C >-10>...>0>...>+10dB >-10>...>0>...>+10dB ND RECEIVER SR4600 7.1-R >-10>...>0>...>+10dB DISP MULTI AUTO TUNED SLEEP AUTO SURR DIRECT ST V - OFF NIGHT PEAK ATT DISC 6.1 MTX 6.1 EQ ANALOG DIGITAL SURROUND DIGITAL LCR AAC PCM LFE SL S SR D EAKER NES SURROUND MODE PURE DIRECT SIMPLE SETUP AUTO HT-EQ MENU ENTER DISPLAY MEMORY CLEAR EXIT BAND T-MODE 7.1-SR 7.1-SBR 7.1-SBL >-10>...>0>...>+10dB >-10>...>0>...>+10dB >-10>...>0>...>+10dB 4. 5. TV VOL. SLEEP MUTE MAIN VOL. OSD MENU 1. 3. 5. ENTER SET UP/ T.TONE PURE DIRECT AUTO MENU OFF DTS 2. 5. 1. Press the CH.SEL button on the remote to enter this menu. 2. Press or cursor button to select desired channel. 3. Using the or cursor button, adjust the volume level of each channel. 7.1-SL 7.1-SW >-10>...>0>...>+10dB >-15>...>0>...>+10dB Maximum +10dB 1 dB interval Reference 1 dB interval +9dB 0dB -9dB button button Minimum -10dB Notes: • When no operation is taken for 5 seconds, the level setup mode will be cancelled. • The condition of these setup will be memorized to 7.1CH INPUT source. ENGLISH 29