Marantz SR7002 User Manual - English - Page 36

CONNECTING VIDEO COMPONENTS DVD player DIGITAL AUDIO VIDEO OUT OUT OUT LR COMPONENT S-VIDEO VIDEO OUT OUT Y CB / PB CR / PR COMPONENT VIDEO IN Y CB / PB CR / PR S-VIDEO IN VIDEO PROJECTOR LR LR LR RL LR LR AUDIO AUDIO OUT IN L R LR VIDEO OUT IN S-VIDEO OUT IN VCR LR ENGLISH Satellite Tuner DIGITAL OUT AUDIO OUT LR VIDEO OUT S-VIDEO OUT LR RL RL LR AUDIO OUT LR VIDEO VIDEO OUT IN S-VIDEO IN Video S-Video Analog Audio Digital Audio (coaxial) Digital Audio (optical) TV VIDEO, S-VIDEO, COMPONENT JACKS There are 3 types of video jacks on the rear panel. VIDEO jack The video signal for the VIDEO jacks is the conventional composite video signal. S-VIDEO jack The video signal is separated into luminance (Y) and color (C) signals for the S-VIDEO jack. The S-VIDEO signals enables high-quality color reproduction. If your video component has an S-VIDEO output, we recommend to use it. Connect the S-VIDEO output jack on your video component to the S-VIDEO input jack on this unit. Component jack Make component video connections to a TV or monitor with component inputs to produce higher quality video images. Use a component video cable or 3 video cords to connect the component video out jacks on the unit to the monitor. Notes: • Be sure to connect the left and right audio channels properly. Red connectors are for the R (right) channel, and white connectors are the for L (left) channel. • Be sure to connect the inputs and outputs of the video signals properly. • If you connect the S-VIDEO or component signal to the S-VIDEO or component jack on this unit, it is not necessary to connect the conventional video signal to the VIDEO (composite) jack. If you use both video inputs, this unit gives priority to the S-VIDEO signal. • Each type of video jack works independently. Signals input to the VIDEO (composite) and SVIDEO jacks or component are output to the corresponding VIDEO (composite) and S-VIDEO or component jacks, respectively. • This unit has the "TV-AUTO ON/OFF" function to turn the TV ON or OFF automatically, by sensing the incoming video signal from the VIDEO jacks. • You may need to setup the digital audio output format of your DVD player, or other digital source components. Refer to the instructions of the each component connected to the digital input jacks. • There is no Dolby Digital RF input jack. Use an external RF demodulator with a Dolby Digital decoder to connect the Dolby Digital RF output jack of the DVD player to the digital input jack on this unit. • The COMPONENT OUTPUT 1 and 2 terminals of this unit can output the same video signal. Moreover, the OUTPUT 2 terminal of the SR8002 can output video signals for multi room playback. (See page 53) 33