Marantz SR7002 User Manual - English - Page 42
Connecting Other Equipment
View all Marantz SR7002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
CONNECTING OTHER EQUIPMENT a s fg d a RS232C Connect an external control device or other device for servicing. (Use a straight cable for the connection.) s DC OUT (DC TRIGGER) External devices can be controlled from the unit by connecting them to the DC OUT terminal (12 V 44mA max). g IR RECEIVER IN (SR8002 Only) This unit can be operated by remote controller without using the internal IR receiver, by connecting an external IR receiver. +12V GND Signal d EMITTER OUT (SR8002 Only) Outputs the remote control signal input to the IR RECEIVER IN terminals. External components can be controlled by connecting them to the EMITTER OUT terminal. f FLASHER IN This unit can be controlled by connecting a control box or other control device to this unit. An IR receiver is connected as shown above. Caution: • Wrongly connecting an IR receiver or connecting an IR receiver of the wrong voltage can damage the unit, therefore do not do this. • 50 mA of current are supplied to the device connected to the IR RECEIVER IN terminal. • Connecting a device that requires more than 50 mA of current to this unit will damage this unit. Before using other devices, carefully check the specifications of those devices. 39 ENGLISH