Marantz SR7002 User Manual - English - Page 57

ENGLISH 5 PREFERENCE • MULTI ROOM SETUP : "5-1 MULTI ROOM SETUP" (see page 55) • DC TRIGGER SETUP : "5-2 DC TRIGGER SETUP" (see page 55) 1. Select "5. PREFERENCE" from MAIN MENU with the 3 or 4 cursor buttons and press the OK/ENTER button. 5.PREFERENCE MULTI ROOM SETUP A B DC TRIGGER SETUP 1 2 STANDBY : BILINGUAL : HDMI AUDIO: HDMI LIP : NORMAL MAIN ENABLE ENABLE RETURN NEXT EXIT 2. Select the desired menu with the 3 or 4 cursor buttons and press the OK/ENTER button. STAND BY: When this is set to "ECONOMY", you can reduce the power consumption when the unit is in the Standby mode. When "ECONOMY" is selected, "TV AUTO" and "RS-232C" are disabled when the unit is in the Standby mode. BILINGUAL: In the Bilingual mode, Dolby Digital and DTS output is set to either "MAIN" or "SUB". Select "BILINGUAL" with the 1 or 2 cursor buttons, then select MAIN ↔ SUB ↔ MAIN+SUB with the 1 or 2 cursor buttons. HDMI AUDIO: This setting determines whether to play back audio input to the HDMI jacks through the unit or output it through the unit to a TV or projector. ENABLE: The audio input to the HDMI jacks can be played back by this unit. In such case, audio signals are not output to the TV or projector. THROUGH: The audio input to the HDMI jacks is not output from the speaker terminals of the unit. Audio data is output directly to the TV or projector. This setting is used to listen to audio on a multi channel TV, etc. After you complete this portion of the setup, move the cursor to "RETURN" with the 3, 4, 1 and 2 cursor buttons and press the OK/ENTER button. HDMI LIP (Auto Lipsync Correction): Video signals may take longer to process than audio signals depending on the connected video equipment. When the unit is connected to TV or Projector supporting Auto Lipsync Correction in HDMI 1.3a, audio and video can be automatically synchronized using this function. Use the 1 or 2 cursor buttons to switch between ENABLE and DISABLE. ENABLE: Auto Lipsync Correction is used to synchronize audio and video. DIESABLE: Deactivates this function. Note: • This function is not available when the unit is connected to equipment that does not support HDMI 1.3a or Auto Lipsync Correction. For details, check the user's manual of the connected equipment. • If this function is unavailable, you can use the regular lipsync function to synchronize audio and video. (See page 66) 5.PREFERENCE MULTI ROOM SETUP A B DC TRIGGER SETUP 1 2 STANDBY : BILINGUAL : HDMI AUDIO: HDMI LIP : NORMAL MAIN ENABLE ENABLE RETURN NEXT EXIT DC TRIGGER SETUP DC TRIG-1:DISABLE TV : DVD : VCR1 : DSS : AUX1 : TAPE : CD/R : AUX2 : TUNER : 7.1CH : RETURN BACK EXIT MULTI ROOM SETUP A VIDEO :DVD AUDIO :DVD SLEEP :OFF MONO/ST:STEREO OSD INFO:ENABLE MULT:OFF MSPK: VOL :VARI VOL : LEV :-90dB LEV : RETURN BACK EXIT DC TRIGGER SETUP DC TRIG-2:DISABLE TV : DVD : VCR1 : DSS : AUX1 : TAPE : CD/R : AUX2 : TUNER : 7.1CH : RETURN BACK EXIT MULTI ROOM SETUP B AUDIO :DVD SLEEP :OFF MONO/ST:STEREO MULT:OFF MSPK: VOL :VARI VOL : LEV :-90dB LEV : RETURN BACK EXIT (The SR7002 is not equipped with the MULTI ROOM SETUP B feature) 54