Maytag MDB7609AWB Installation Instructions - Page 16

Connect to Water Supply Chectkhatlevelinglegsarefirmlyagainstht efloor. Closeandlatchthedoora, ndplaceleveal gainstht e frontpanelC. hectkhatdishwasheisrcenterefdromfront tobackintheopeningI.f neededa,djustlevelingleguntil dishwasheisrplumbR. epeafot rothersideofdishwasher. Helpfu"l13pP:ushuponfrontofdishwashteor raise dishwasheorffthegroundtoadjustfrontlegsW. ith someinstallationist,maybeeasietro adjusthefrontleg usingthe3/16"hexheadsockeotr adjustablwerench. Copper tubing only: Slide nut then ferrule onto copper tubing about 1" (2.5 cm). NOTE: To avoid vibration during operation, route the water supply line so that it does not touch the dishwasher base, frame or motor. Copper tubing only: Put the tubing into the 90 ° elbow fitting as far as it will go (the copper tubing bends and kinks easily). Slide the nut and ferrule forward and start the nut onto the elbow threads. Flexible braided connection: Secure nut to elbow using 5/8" open ended wrench or adjustable wrench. NOTE: Do not use Teflon ® tape with compression fittings. Placeleveal gainsttopfrontopeningoftub.Chectkhat dishwasheisr leveflromsidetoside.If dishwasheisr not level,adjusftrontlegsupor downuntildishwasheisr level. 16 Hold the 90 ° elbow fitting still with one adjustable wrench and tighten the nut with second adjustable wrench. Helpful "l]p: Use a 5/8" open ended wrench for easier access to tighten connection.