Maytag MDB7609AWB Installation Instructions - Page 8

WoodcabinetS: andthe holeuntilsmooth. Metacl abinetC: ovehr olewithgrommeitncludewd ith powersupplycordkit. Option B, Direct Wire: Helpful Tip: Wiring the dishwasher will be easier if you route the cable into the cabinet opening from the right-hand side. Route cable from power supply through cabinet hole (cable must extend to the right front side of cabinet opening). Tape cable to the floor in area shown. This will prohibit cable from moving when dishwasher is moved into cabinet opening. Prepare and Route Water Line Helpful Tip: Routing the water line through the left side of cabinet opening will make water connection easier. Drill a 3/4" (1.9 cm) hole in right-hand cabinet side or rear. See product and cabinet opening dimensions. Drill a 1/2" (1.3 cm) hole in the cabinet side or rear. Wood cabinet: Sand the hole until smooth. Metal cabinet: Cover hole with grommet (Part Number 302797 - not provided). 8 Measure overall length of copper tubing or flexible braided water supply line. Attach to the hot water line using a connection configuration that is in compliance with local codes and ordinances. The water line to the dishwasher should have a manual shutoff valve.